Tesy Electric Hot Water Cylinder 100 Litre Un-vented, 2000w, Wall Mounted
Tesy Electric Hot Water Cylinder 100 Litre Un-vented, 2000w, Wall Mounted. Tesy Electric wall mounted UN-VENTED hot water heaters from the Bi-Light series are an elegantly styled "un-vented" hot water cylinders that have been developed to conform to the highest European high efficiency requirements. Manufactured in Europe, the product range offers models with storage capacity ranging from 30 to 150 litres. (30 litre / 50 litre / 80 litre / 100 litre / 120 litre / 150 litre). Designed to be connected directly to the mains cold water supply, the Tesy unvented hot water cylinders provide fast and efficient hot water with low energy consumption and simple installation. Simply connect the cylinder to a mains cold water supply on the inwards feed connection and connect the hot water pipework to the outwards feed connection cylinder (both connections are 15mm, and are located on the underside of the cylinder), connect to a 13amp fused spur and the cylinder will provide hot water. The unique design offers an adjustable temperature control to allow the user to select the desired water temperature and high efficiency water heating that are up to 16% more efficient than rival hot water cylinders. WALL MOUNTED (brackets included, does NOT include screws).
ADJUSTABLE TEMPERATURE CONTROL to allow the user to set the desired water temperature. PISTON EFFECT for control of the speed of incoming water to increase the efficiency of the Hot Water heating. INSUTECH - TESY technology for highly efficient insulation, extremely low heat losses, and a thermal bridge between the wall bracket and the cylinder.
LIGHT COLOUR Indicator to provide a visual indication that the water is at the designed temperature. GLASS CERAMIC coating for corrosion protection. Diameter of each Model is 440mm, Height 985mm. 100 Litre Model - 2000w , 2h 36min Warm Up Time , Rated for 4 People, 27 Min. Building Control regulations apply when safely installing an un-vented hot water cylinder.
The Cylinders are unvented and require a small safety expansion vessel (5-8 litre) and a pressure release valve installing on the pipework in accordance with UK regulations. If you have any technical questions we are on hand to help 0161 439 1400. 2h 36min Warm Up Time. "Optional" Safety Vessel is 8 Litre Potable. The Cylinders are unvented and require a small safety expansion vessel (5-8 litre) and a pressure release valve installing on the pipework in accordance with UK.